Description
Tecbond 425 is a high performance, extended open time adhesive primarily formulated for spraying.
This adhesive can be used for bonding wood, fabrics, most plastics, some metals and concrete.
It has been formulated to maximise glue delivery rate. This is a very versatile spray adhesive that has been designed for fast, clean and reliable running in the Tec 6300 and the Tec 7300.
Tecbond 425 is a high performance, extended open time adhesive primarily formulated for spraying. Formulated in Mini EcoBlocks for use in bulk tank systems or the Tec 4500 pneumatic glue gun
When sprayed, Tecbond 425 can be used for bonding packaging foams, bubble film, vacuum foamed mouldings, upholstery foams, cotton backed vinyl and many other fabrics.
Tecbond 425 when applied in bead or dot achieves good bonds on most plastics, including some polyolefins
All constituent parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).
For use with all Tec 43mm glue guns.
- Best joint designs for hot melt gluing
- What is a cold bond ?
- Are glue sticks waterproof ?
- What is a Hot Melt Adhesive?
- What makes a Tecbond hot melt glue sticks… stick?
- Hot Melt fumes
Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.
Please contact our technical team on 0161 627 1001 to discuss your application in further detail.