Description
Tecbond 261 is a very versatile product that will provide tough durable bonds on a wide range of substrates.
Tecbond 261 is a very soft flexible adhesive that runs well in the Tec 12mm glue guns. If feeding problems occur in lower cost 12mm guns and/or in warm climates then keeping the sticks in the fridge before use can help.
Very high performance, high output, long open time, tough flexible adhesive, suitable for ceramic, plastics (including polypropylene) and wood. Excellent adhesion to varnished board and difficult to bond boards used for carton sealing and closing. Excellent for bonding ceramic tiles, slates, bricks to display boards due to the products unique flexibility. Excellent for bonding polypropylene to itself and other plastics
All constituent parts of this adhesive have been approved by the American F.D.A under C.F.R 21.175.105 (adhesives).
For use with all Tec 12mm glue guns.
- Best joint designs for hot melt gluing
- What is a cold bond ?
- Are glue sticks waterproof ?
- What is a Hot Melt Adhesive?
- What makes a Tecbond hot melt glue sticks… stick?
- Hot Melt fumes
Important: Hot Melt Adhesives do have limitations! Being a thermoplastic product hot melt adhesives soften with heat and return to a solid state by the loss of heat. With this in mind, standard hot melt adhesives are not recommend for applications subjected to heat or direct sunlight. However we do offer grades with high heat resistance. Water and hot melt adhesives are a bad combination – standard hot melt adhesives are not waterproof and should be avoided for external applications. On saying this, we do have PUR adhesives that can be use externally and can even be dry cleaned. We strongly recommend that you thoroughly test the product and satisfy yourselves that the product is suitable for your application. This product suggested uses are a generalised suggestion and other factors may play a role in achieving the required bond, e.g. heat resistance, chemical resistance, gap filling, surface area to glue, open time or a degree of glue flexibility may be required etc.
Please contact our technical team on 0161 627 1001 to discuss your application in further detail.
